• Open systems operating at temperatures up to 200˚C.
• Closed systems (sealed with cold oil or inert gas) operating at bulk oil temperatures up to 320˚C.
For long, trouble-free service in closed systems, the maximum film temperature on the heater surfaces should be limited to 340˚C.
Systems must have forced circulation of the heat transfer fluid.

• MSDS
• GB 23971-2012

Maximum energy efficiency
Excellent heat transfer properties enable easy circulation and efficient transfer of heat.

Resists deposit formation
Outstanding oxidation and thermal stability resists formation of sludges and coke deposits, providing long oil service life.

Rapid response at start-up
Low temperature flow characteristics allow prompt circulation.

Economical low pressure operation
Low vapor pressure at elevated temperatures minimizes evaporation, vapor lock and pump cavitation, allowing efficient operation at lower system pressures, avoiding the need for expensive high pressure high pressure piping and heat exchangers.

ISO VG: 46
Density, kg/L @ 15°C: 0.867
Kinematic Viscosity, @ 40°C (mm²): 43.27
Kinematic Viscosity, @ 100°C (mm²): 6.6
Viscosity Index: 104
Copper Corrosion . 3hr @ 100°C: 1a
Flash Point °C: 238